Tuner

The tuner displays the pitch of the analyzed signal. Use the visualization to tune your guitar or other instrument.

The pitch of each string is shown large in the center of the display. The calibration marks show the deviation of the played to the exact pitch. Red triangles on the right and left show whether you need to tune the string higher or lower. With exact tuning the triangles turn green.

In the preset operating mode Chromatic the tuner displays the pitch of the notes played in semitone steps. From the list box at the top you can select common tunings for guitar, bass and ukulele. Then only the relevant pitches of the strings for the respective instrument in the corresponding tuning are displayed.

This is how you tune your guitar:

1. Select the track to whose input the guitar is connected.

2. Open the visualization window (menu View or keyboard shortcut Ctrl + Alt + Shift + V) and select the visualization Tuner in the context menu (right click).

3. In the visualization window, click the arrow in the upper left corner and select Track visualization (current track).

4. Make sure that monitoring is active for the track.

5. The pitch of each string played is shown large in the center of the display. The calibration marks show the deviation of the played to the exact pitch. Red triangles to the right and left show the direction the strings should be tuned. If the tuning is exact, the triangles turn green.